Owens Corning R15 Insulation 15 x 93 Unfaced Fiberglass Batt
OC unfaced Formaldehyde-free ™ fiberglass insulation is excellent for dependable thermal in addition to noise management. Owens Corning unfaced insulation is easily available in pre-cut batts to fit common wall and also ceiling locations. Boost the total effectiveness of your home with fiberglass wall surface bay insulation. It’s thermal effectiveness helps to keep temperature degrees down, decreasing power loss as well as energy expenditures while additionally decreasing room to room noise transmission.
- Easy to install: Precut batts friction fit in common spaces
- Excellent thermal control
- Soundproof: Effective acoustical control
- Fiberglass Insulation Batt: 15 in. x 93 in.x 3.5 in. thick
- Long Term Performance: will not settle nor slump
- Bags per Master Pack: 5
- Pieces per Bag : 8
- Square feet per Bag: 77.50
- Best For: 2×4 Interior walls, 2×4 Exterior Walls, Floors, Sheds
- Certified GREENGUARD GOLD CertifiedSM and validated to be formaldehyde free2, to contain at least 55% recycled content, and Contributes to LEED® project certification
- Product Data Sheet –Click here
Insulating Exterior Wall Surfaces with R 15 EcoTouch Pink Fiberglass
Insulate exterior wall surface spaces with at the very least R-15 fiberglass insulation
Lower Sound Control by Insulating Inside Walls
Noise control is an additional part of your property’s efficiency. Owens Corning offers several alternatives for thermal and noise insulation in indoor walls. EcoTouch Fiberglass ™ Insulation, calling for no special tools or training, supplies exceptional air-infiltration control and thermal security. For additional sound defense. Their fiberglass batts and Thermfiber mineral wool Batts take in audio resonances within the wall bays as well as are as very easy to put in as regular insulation. Unfaced is best for Interior and Exterior Walls.
Help Maintain Homes Peaceful With R 15 Insulation for Floors and Wall surfaces
If your home has a vented crawlspace with insulated ducts and no pipes, you likely have actually felt their cool and loud floors. The most effective solution for both the thermal as well as acoustical problems is to insulate the floor over the crawlspace.
The Owens Corning R15 Fiberglass or Thermafiber mineral wool reduces the degree of undesirable sound transmitted in the house while preserving the wanted level of comfort.
For total acoustic efficiency, utilize with Owens Corning R15 fiberglass or Thermfiber Mineral wool acoustic batts, which soak up audio vibrations within the wall cavity. They provide outstanding in-place acoustical performance, and are as easy to install as thermal insulation.
About Owens Corning Insulation
Owens Corning ® EcoTouch ® PINK ® Fiberglas ™ Insulation with PureFiber ® Tech is a preformed, versatile blanket insulation. It is manufactured in R-values from 11 to 49, with sizes varying from 31/2 inches to 14 inches. It is readily available unfaced, or Paper-faced with either a kraft or foil vapor retarder.
Owens Corning is produced with less dust than other fiberglass brands, EcoTouch ® PINK ® Fiberglas ™ insulation has outstanding rigidity as well as recovery qualities. They make use of compression product packaging which speeds property site handling and also installment.
Uses for R 15 Unfaced
– Wood-framed wall surface, floor and also roof/ceiling space wall assemblies
– Metal-framed wall surface and sub-floor bay installations
– Furring strips mounted on the inside area of basement wall surfaces
– Interior areas of basement and unvented crawl space foundation surfaces
R15 Unfaced Installation
See Owens Corning magazine “Installment Overview for Light Thickness Insulation” (Pub. No. 10017858) for more information.
Environmentally Friendly as well as Sustainability
Owens Corning is an around the world leader in construction material systems, insulation as well as composite options, supplying a broad range of top notch services and products. Owens Corning is committed to driving sustainability by providing remedies, transforming markets and also improving lives. Even more details can be found over at www.owenscorning.com.
Owens Corning is an international corporation that creates and creates insulation, roof covering, and also fiberglass compounds. It was created in 1935 as a collaboration between 2 major American glassworks, Corning Glass Works and Owens-Illinois. The business employs roughly 19,000 individuals worldwide.
Insulating Walls with R15 Unfaced Fiberglass
When you are insulating two-by-four) as well as two-by-six framed outside wall cavities as well as intend to use fiberglass insulation, what thickness is ideal? The inquiry comes to be all a lot more essential because of the irreversible nature of wall assembly as well as wall insulation: Once the insulation is in the wall cavity and sealed up with drywall, it is difficult to swap out.
When you install inadequate insulation, you will certainly have a colder residence. However adding way too much insulation– packing in more than is required– can also result in a cooler residence than is necessary. Tiny air pockets produced within the insulation are what help keep a home cozy and cozy, not the tiny hairs of fiberglass or paper kraft facing. Striking the best balance between too little insulation as well as excessive insulation will keep you and your household cozy throughout the wintertime.
Basics of Faced and Unfaced Fiberglass Insulation, From R Thirteen to R Nineteen
R-value is a typical system of value for establishing, amongst lots of points, just how effective your insulation will be. The R refers to outright thermal resistance. Higher R-value numbers indicate that the fiberglass material withstands the chill or warmth from the outdoors better. Density, width, and manufacturer of materials are some elements that add to R-value.
Insulation for 2 by 4 Wall Cavities
Most wall assemblies, especially those in older homes, are constructed with two-by-four (2×4) studs. Since modern two-by-fours are not 4 inches, real deepness of the wall stud is 3 1/2 inches.
In most wall cavity applications, you will certainly use R-13 or R-15 kraft-faced fiberglass batts for these 2 by 4 stud bays. While ranked in different ways, these two types of insulation are close sufficient in density that they can both match modern two-by-four wall systems. With R 15 being a high density product, it is preferred for sound deadening. However it costs about 70% more than R 13.
Older residences, specifically those pre-dating the 1950s, may utilize two-by-fours that really are 2 inches by 4 inches. In this instance, you can still install R-13 or R-15 fiberglass insulation. There is no 4-inch deep faced fiberglass insulation in batts or rolls on the common market.
Where to Buy R15 Unfaced Insulation
Owens Corning insulation is offered in big box shops as well as likewise can be acquired with distributors like Pacific Insulation. Pacific Insulation gives an unique chance to get the very same products at store at wholesale prices. Homeowner as well as service providers have the chance to purchase little or huge amounts direct from the distributor. By purchasing straight from the wholesaler we are able to provide reduced rates. Buyers can pick up have delivered from one of our 70 locations or we can drive our truck direct to your work site.
U.S. Department of Energy Recommended Total R-Values
The following 2008 Department of Energy zone recommendations are based on comparing estimated future energy savings to the current cost of installing insulation. The DOE gives a range for many locations for the following reasons:
- Energy costs vary greatly over each zone
- Installed insulation costs vary greatly over each zone
- Heating and cooling equipment efficiency varies from house to house
- Best estimate of future energy costs may not be exact.
- Reference : Department of Energy Insulation Fact Sheet
(DOE/CE-0180 2008 update) DOE/CE-0180 2008, Insulation Fact Sheet.