Owens Corning R15 Insulation 15 x 93 Unfaced Fiberglass Batt
OC unFaced Formaldehyde-free ™ fiberglass insulation is perfect for dependable thermal as well as noise control. Owens Corning unFaced insulation is easily available in pre-cut batts to fit standard wall surface and ceiling locations. Boost the general efficiency of your residence with fiberglass wall surface space insulation. It’s thermal efficiency aids to keep temperature level degrees lower, reducing power loss and power costs while additionally lowering room to room sound transmission.
- Easy to install: Precut batts friction fit in common spaces
- Excellent thermal control
- Soundproof: Effective acoustical control
- Fiberglass Insulation Batt: 15 in. x 93 in.x 3.5 in. thick
- Long Term Performance: will not settle nor slump
- Bags per Master Pack: 5
- Pieces per Bag : 8
- Square feet per Bag: 77.50
- Best For: 2×4 Interior walls, 2×4 Exterior Walls, Floors, Sheds
- Certified GREENGUARD GOLD CertifiedSM and validated to be formaldehyde free2, to contain at least 55% recycled content, and Contributes to LEED® project certification
- Product Data Sheet –Click here
Insulating Exterior Wall Surfaces with R 15 EcoTouch Pink Fiberglass
Insulate exterior wall surface bays with at least R-15 fiberglass insulation
Lower Sound Control by Insulating Interior Walls w/R15
Noise control is one more component of your residences efficiency. Owens Corning uses several choices for thermal as well as noise insulation in interior walls. EcoTouch Fiberglass ™ Insulation, calling for no unique devices or training, provides phenomenal air-infiltration control and also thermal security. For additional audio protection. Their fiberglass batts and Thermfiber mineral wool Batts take in sound resonances within the wall cavity and also are as easy to put in as normal insulation.
Help Maintain Residences Quiet With R 15 Insulation for Floors and Walls
If your property has a vented crawlspace with insulated air ducts and also no pipelines, you likely have actually felt their cold as well as loud floorings. The best remedy for both the thermal and also acoustical troubles is to insulate the floor over the crawlspace.
The Owens Corning R15 Fiberglass or Thermafiber mineral wool minimizes the degree of unwanted sound sent in the house while keeping the desired degree of coziness.
For full acoustic performance, utilize with Owens Corning R15 fiberglass or Thermafiber Mineral wool acoustic batts, which absorb sound resonances within the wall cavity. They supply outstanding in-place acoustical efficiency, and also are as simple to put in as thermal insulation.
About Owens Corning Insulation
Owens Corning ® EcoTouch ® PINK ® Fiberglas ™ Insulation with PureFiber ® Technology is a preformed, flexible blanket insulation. It is made in R-values from 11 to 49, with thicknesses varying from 31/2 inches to 14 inches. It is offered unfaced, or faced with either a kraft or foil vapor retarder.
Owens Corning is made with less dust than other fiberglass products, EcoTouch ® PINK ® Fiberglas ™ insulation has exceptional rigidity and recovery qualities. They utilize compression packaging which speeds work site handling and also setup.
Uses for R 15 Unfaced
– Wood-framed wall surface, flooring and also roof/ceiling space wall surface installations
– Metal-framed wall and also sub-floor cavity installations
– Furring strips mounted on the interior side of cellar walls
– Indoor surfaces of basement and unvented crawl space structure surfaces
See Owens Corning magazine “Installment Guide for Light Density Insulation” (Bar. No. 10017858) for additional information.
Environmental and also Sustainability for R 15 Unfaced
Owens Corning is a globally leader in building product
systems, insulation as well as composite remedies, delivering a broad range of high-quality materials and services. Owens Corning is dedicated to driving sustainability by delivering solutions, transforming markets and improving lives. Even more details can be discovered over at www.owenscorning.com.
Owens Corning is a worldwide corporation that creates as well as creates insulation, roofing, as well as fiberglass composites. It was formed in 1935 as a collaboration between 2 significant U.s. glassworks, Corning Glass Works and Owens-Illinois. The corporation uses roughly 19,000 people around the globe.
Insulating Walls with r15 Unfaced Fiberglass
If you are insulating 2×4 as well as two-by-six framed exterior walls and also intend to utilize fiberglass insulation, what thickness is recommended? The question becomes all much more vital due to the irreversible nature of wall construction and also wall cavity insulation: Once the insulation is installed the wall as well as nailed up with drywall, it is not easy to swap out.
When you add insufficient insulation, you will certainly have a colder house. Yet installing excessive insulation– packing in more than is needed– can likewise cause a colder residence than is essential. Tiny air pockets produced within the insulation are what help keep a residence warm and cozy, not the tiny strands of fiberglass or paper facing. Striking an ideal balance in between too little insulation as well as excessive insulation will certainly keep you and your household warm throughout the winter.
Basics of Kraft Faced/Unfaced Fiberglass Insulation, From R Thirteen to R Nineteen
R-value is a typical device of measurement for identifying, among several points, just how effective your insulation will be. The R refers to absolute thermal resistance. Higher R-value numbers suggest that the fiberglass material resists the chill or warmth from the outdoors better. Density, how wide, and manufacturer of products are some factors that contribute to R-value.
R15 Insulation for Two by Four Wall Cavities
Most wall cavity installations, particularly those in older houses, are constructed with two-by-four (2×4) studs. Because modern-day two-by-fours are not 4 inches, the true depth of the wall bay is 3 1/2 “.
In most wall cavity applications, you will use R-13 or R-15 kraft-faced fiberglass precut batts for these 2 by 4 stud bays. While ranked in a different way, these two kinds of insulation are close enough in density that they can both fit into modern-day two-by-four wall cavity systems. With R 15 being a higher density product, it is better for sound deadening. However is can be about 70 percent more than R 13.
Older residences, especially those pre-dating the 1950s, might employ two-by-fours that absolutely are 2 inches by 4 inches. In this situation, you can still use R-13 or R-15 fiberglass insulation. There is no 4-inch deep faced fiberglass insulation in batts or rolls on the common market.
Owens Corning insulation is marketed in big box stores and likewise can be purchased through suppliers like Pacific Insulation. Pacific Insulation supplies an unique opportunity to buy the very same items at retails stores at wholesale pricing. Homeowner as well as specialists have the possibility to get small or huge quantities straight from the wholesaler. By acquiring direct from the supplier we are able to use lower prices. Purchasers can pick up have delivered from one of our 70 warehouses or we can deliver straight to your project site.
U.S. Department of Energy Recommended Total R-Values
The following 2008 Department of Energy zone recommendations are based on comparing estimated future energy savings to the current cost of installing insulation. The DOE gives a range for many locations for the following reasons:
- Energy costs vary greatly over each zone
- Installed insulation costs vary greatly over each zone
- Heating and cooling equipment efficiency varies from house to house
- Best estimate of future energy costs may not be exact.
- Reference : Department of Energy Insulation Fact Sheet
(DOE/CE-0180 2008 update) DOE/CE-0180 2008, Insulation Fact Sheet.